I-China SNS 4H series 5/2 manual control air air pneumatic hand pull valve with lever Manufacturer and Supplier |I-SNS Pneumatic

I-SNS 4H series 5/2 manual air control air pneumatic hand pull valve with lever

Inkcazelo emfutshane:

Xa ivalve ishukunyiswa ngesandla, i-valve caitridge iyatshintsha ize ngaloo ndlela itshintshe icala lokuhamba komoya.
I-valve ilula ukuSebenza, kulula ukuyifaka kwaye kulula ukuyisusa.
I-Valve Body yenziwe nge-Aluminiyam ye-High Precision High kunye nobunzima obuphezulu kunye noBomi beNkonzo ende.
Umsonto ngamnye ucutshungulwe kakuhle, akukho Burrs, ugudile kwaye kulula ukuyifaka.
Umzimba weValve unomsesane wokuNxibelela oPhakamileyo, ekungelula ukuvuza, kunye nePad yeRubha eneOli yokuthambisa iNciphisa ukuRhwabana.
Umngxuma wangaphakathi uQhutywa yiNkqubo eKhethekileyo, kunye neNcinci yokuNxhathisa iFriction kunye noBomi beNkonzo ende.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ingcaciso yeMveliso

■ Uphawu :
Sizama ukugqibelela kuzo zonke iinkcukacha.
Ukukhetha okungqongqo kwenxalenye nganye, kubandakanywa imathiriyeli kunye nezinye iindawo ezisecaleni.
Ukusetyenzwa kakuhle kwentambo kunye nokusebenza kakuhle kokutywinwa kugcwele umgangatho ophezulu
yevalve yesandla.
Phawula :
Umsonto weNPT unokwenziwa ngokwezifiso.

Umzekelo		4H310-08	4H310-10	4H410-15
Imidiya eSebenzayo		Umoya ocinezelekileyo
Imo yokusebenza		Uhlobo olusebenza ngokuthe ngqo
Indawo yeCandelo esebenzayo		16mm²(Cv=0.89)	30mm²(Cv=1.67)	50mm²(Cv=2.79)
Ubungakanani bezibuko		Isingeniso=IsiPhumo=G1/4 I-Exhaust Port=G1/8	Isingeniso=IsiPhumo=G3/8 I-Exhaust Port=G1/4	Indawo yokungena=Isixhobo sokukhupha umbhobho=G1/2
Uxinzelelo lokusebenza		0~0.8Mpa
Uxinzelelo lobungqina		1.0Mpa
Ubushushu bokusebenza		0-60℃
Ukuthambisa		Akukho mfuneko
Izinto eziphathekayo	Umzimba	Ingxubevange yeAluminiyam
	Itywina	NBR